KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
- 10. A suspension bracket
   10.1. Specifications
   10.2. Check of elements of a forward suspension bracket
   10.3. Check and adjustment of corners of installation of wheels
   10.4. A convergence of forward wheels
   10.5. A rack of a forward suspension bracket
   10.6. The bottom lever of a forward suspension bracket
   10.7. The forward stabilizer of cross-section stability
   10.8. A beam of a back suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment


Журналисты сообщили продать квартиру в краснодаре




10.2. Check of elements of a forward suspension bracket
THE GENERAL DATA

Cylindrical spring


If position of the car concerning a road covering normal, means springs have no defects. In the presence of a car warp replace a corresponding spring.

Racks

For check of serviceability of racks of forward and back suspension brackets serially press each corner of a body of the car and sharply release it. If the body comes back in a starting position without раскачиваний, the rack means is serviceable.

Examine racks on absence подтеканий liquids. Insignificant humidifying of a rack – the normal phenomenon.

Check up a condition of the top plug of a back rack. For this purpose lift a back part of the car so that the plug of a back rack has completely unloaded, thus the back wheel should stand on the earth.

Any even insignificant люфт plugs testifies to its deterioration and necessity of replacement.

The bottom lever of a forward suspension bracket

Check up following places and restore or replace the bottom lever:

      – Reliability of a tightening of bolts and nuts;
      – Presence of deformation or cracks in the bottom lever.

Longitudinal draught of a forward suspension bracket

Check up following places and restore or replace longitudinal draught:

      – Reliability of a tightening of bolts and nuts;
      – Deterioration or damage of rubber plugs.