KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
- 12. A steering
   12.1. Specifications
   12.2. A steering without the hydraulic amplifier
   12.3. Check of the helmsman management without the hydraulic amplifier
   12.4. A steering column without the hydraulic amplifier
   12.5. A steering with the hydraulic amplifier
   12.6. Check of pressure of a liquid in hydraulic system
   12.7. Check of effort of turn of a steering wheel
   12.8. Check of level of a liquid
   12.9. Prorolling of hydraulic system of the amplifier of a steering
   12.10. A belt of a drive of the pump of the amplifier of a steering
   12.11. Steering transfer with the steering amplifier
   12.12. The pump of the amplifier of a steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







12.10. A belt of a drive of the pump of the amplifier of a steering

Check

PERFORMANCE ORDER
1. Check up a belt of a drive of the pump of the amplifier of a steering on absence of cracks, deterioration and development. If necessary replace a belt.

2. Measure a belt tension, pressing with effort 98 Н (10 kg) in a place located on identical removal from pulleys and measure a belt deflection. If necessary adjust a belt tension.

Deflection of a belt of a drive of the pump of the amplifier of a steering
The new: 8–9 mm
Were in the use: 9–10 mm

3. By the special adaptation measure a belt tension.

Tension adjustment

PERFORMANCE ORDER
1. Loosen the bolts And, In and S.Vrashchaja adjusting bolt D adjust a belt tension.
2. Tighten bolts With, A and B the demanded moment.

The inhaling moment:
And: 37,2–51,9 Nm
In: 37,2–51,9 Nm
With: 37,2–51,9 Nm

Replacement

PERFORMANCE ORDER
1. Loosen the bolts And, In and With.
2. Rotating adjusting bolt D ослабьте a belt tension.
3. Remove a belt.
4. Establish a new belt and adjust a belt tension.