KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
- 12. A steering
   12.1. Specifications
   12.2. A steering without the hydraulic amplifier
   12.3. Check of the helmsman management without the hydraulic amplifier
   12.4. A steering column without the hydraulic amplifier
   12.5. A steering with the hydraulic amplifier
   12.6. Check of pressure of a liquid in hydraulic system
   12.7. Check of effort of turn of a steering wheel
   12.8. Check of level of a liquid
   12.9. Prorolling of hydraulic system of the amplifier of a steering
   12.10. A belt of a drive of the pump of the amplifier of a steering
   12.11. Steering transfer with the steering amplifier
   12.12. The pump of the amplifier of a steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







12.9. Prorolling of hydraulic system of the amplifier of a steering
PERFORMANCE ORDER
1. Check up that liquid level is between labels MAX and MIN, being on the case of a transparent tank.
2. Lift a forward part of the car and fix on support.
3. At the idle engine turn a steering wheel from an emphasis against the stop some times.
4. Check up liquid level. If liquid level has gone down, add a liquid.
5. Repeat steps 2 and 3 while liquid level is not stabilised.
6. Start up the engine and leave to work on frequency of rotation of idling.
7. Turn a steering wheel from an emphasis against the stop some times.
8. Check up that the liquid does not foam also its level has not gone down.
9. If necessary add a liquid and repeat steps 7 and 8.