KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. The unilateral vacuum valve
   13.4. The vacuum amplifier of brakes
   13.5. Prorolling of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   + 13.8. A brake pedal
   13.9. Replacement of lobbies brake колодок
   13.10. Replacement brake колодок on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. The main brake cylinder
   13.14. The pressure terminator
   13.15. A lay brake
   13.16. The block of management ABS
   13.17. The block of hydraulic management (HCU)
   13.18. The forward gauge of frequency of rotation of a wheel
   13.19. The back gauge of frequency of rotation of a wheel
   + 13.20. A gear rotor of the gauge of frequency of rotation of a wheel
   13.21. The basic survey
   13.22. Check of functionality
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







13. Brake system
THE GENERAL DATA

Arrangement of elements of brake system without ABS on the car

1 – a tube of a highway of a high pressure of brake system;
2 – a brake pedal;
3 – the main brake cylinder;
4 – the vacuum amplifier of brakes;
5 – the forward disk brake mechanism;
6 – a support;
7 – the back drum-type brake mechanism;
8 – the working brake cylinder;
9 – пополнительный a tank;
10 – the block of hydraulic management;
11 – a cable of a lay brake;
12 – the lever of a lay brake.

On cars the working brake system with a hydraulic drive is used.

The system works as follows:

      – The brake pedal is connected with the main brake cylinder;
      – When the pedal is pressed, the liquid under pressure from the main brake cylinder on metal tubes and flexible hoses is transferred to forward and back brake mechanisms;
      – Working brake cylinders represent hydraulic modulators which transform the pressure of a liquid created in the main brake cylinder in moving of elements of the brake mechanism;
      – Forward and back pistons of a support of a brake move and at the expense of a friction about brake disks and drums provide demanded delay of the car;
      – At release pedals of a brake pressure in system decreases.

Brake колодки and pistons come back to neutral or to a starting position and braking stops.

At reduction of level of a brake liquid the gauge of level of a liquid in the main brake cylinder includes a control lamp in combinations of devices. If the control lamp burns, first of all check up that the lay brake is released, as the lamp specifies in the lowered level of a liquid and the tightened lay brake.