KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. The unilateral vacuum valve
   13.4. The vacuum amplifier of brakes
   13.5. Prorolling of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   + 13.8. A brake pedal
   13.9. Replacement of lobbies brake колодок
   13.10. Replacement brake колодок on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. The main brake cylinder
   13.14. The pressure terminator
   13.15. A lay brake
   13.16. The block of management ABS
   13.17. The block of hydraulic management (HCU)
   13.18. The forward gauge of frequency of rotation of a wheel
   13.19. The back gauge of frequency of rotation of a wheel
   + 13.20. A gear rotor of the gauge of frequency of rotation of a wheel
   13.21. The basic survey
   13.22. Check of functionality
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment


Запчасть интернет магазин по материалам http://www.sevzap.su.




13.7. Check and replacement of brake hoses

Check

Check up brake hoses on absence of cracks and local вспучивания. If necessary replace a brake hose.

Removal

PERFORMANCE ORDER
1. Special key OK130 430 019 turn away a connecting nut of a brake tube from a hose.
2. Release a clip and remove a brake hose from an arm.

Installation

PERFORMANCE ORDER
1. Establish a brake hose in an arm and fix its clip.
2. Connect a brake hose to a brake tube and special key OK130 430 019 tighten a connecting nut.

The prevention

Check up that the brake hose is not bent.

Check up that the brake hose does not concern other details of the car at turn of a steering wheel from an emphasis against the stop or at rocking of a body of the car.

The inhaling moment: 1322 Nm


3. Some times press a pedal of a brake and check up absence of leaks from a brake hose and its connection with a brake tube.
4. Check up level of a brake liquid which should be between labels MAX and MIN located on a wall transparent пополнительного a tank.
5. Remove air from hydraulic system of a drive of brakes.