KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. The unilateral vacuum valve
   13.4. The vacuum amplifier of brakes
   13.5. Prorolling of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   - 13.8. A brake pedal
      13.8.1. Height of installation of a pedal of a brake
      13.8.2. A free wheeling of a pedal of a brake
      13.8.3. Distance of a pedal of a brake from a floor
   13.9. Replacement of lobbies brake колодок
   13.10. Replacement brake колодок on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. The main brake cylinder
   13.14. The pressure terminator
   13.15. A lay brake
   13.16. The block of management ABS
   13.17. The block of hydraulic management (HCU)
   13.18. The forward gauge of frequency of rotation of a wheel
   13.19. The back gauge of frequency of rotation of a wheel
   + 13.20. A gear rotor of the gauge of frequency of rotation of a wheel
   13.21. The basic survey
   13.22. Check of functionality
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







13.8.2. A free wheeling of a pedal of a brake

Check

PERFORMANCE ORDER
1. With the switched off engine press a brake pedal some times to clean depression in the vacuum amplifier of brakes.
2. A hand press a pedal of a brake before occurrence of notable resistance and measure a pedal free wheeling.

Free wheeling of a pedal of a brake: 47 mm

Adjustment

PERFORMANCE ORDER
1. Loosen the counternut D and, rotating pusher C, adjust a free wheeling of a pedal of a brake.
2. Check up height of installation of a pedal of a brake and work of stop signals.

3. Tighten counternut D.

The inhaling moment: 23,534,3 Nm

4. Check up height of installation of a pedal of a brake and action of stop signals