KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
- 14. A body
   14.1. The inhaling moments
   14.2. A cowl
   14.3. A luggage carrier cover
   14.4. The hinge of a cover of a luggage carrier
   14.5. A luggage space door
   14.6. A gazonapolnennaja rack of support of a door of a luggage space
   14.7. The lock of a door of a luggage space
   14.8. The external handle of a door of a luggage space
   14.9. A forward door
   14.10. Vlagozashchitnoe consolidation of a door
   14.11. A back door
   14.12. The panel of devices
   14.13. A ceiling
   14.14. A lateral upholstery of a luggage carrier of five-door cars
   14.15. A back upholstery of a luggage carrier
   14.16. The top upholstery of a forward rack
   14.17. The bottom upholstery of the central rack
   14.18. The top upholstery of the central rack
   14.19. An upholstery of a back rack of four-door cars
   14.20. An upholstery of a back rack of five-door cars
   14.21. An upholstery of a forward door
   14.22. An overlay of a threshold of a forward door
   14.23. An upholstery of a back door
   14.24. An upholstery of a door of a luggage space
   14.25. An overlay of a threshold of a back door
   14.26. A back shelf
   14.27. An upholstery of an arch of a back wheel of four-door cars
   14.28. An upholstery of an arch of a back wheel of five-door cars
   14.29. A forward bumper
   14.30. A back bumper
   14.31. Forward seats
   14.32. An upholstery of a back of a forward seat
   14.33. An upholstery of a pillow of a forward seat
   14.34. A headrest
   14.35. The leaning back hinge of a forward seat
   14.36. Back sitting
   14.37. Seat belts
   14.38. Seat belts of a back seat
   14.39. Скоба fastenings of a back seat belt
   14.40. The distances designed on a plane, for check of distances between separate points of a body of the car
   14.41. Actual distances of check of distances between separate points of a body of the car
+ 15. Air central air
+ 16. The electric equipment







14.11. A back door
THE GENERAL DATA

Back door

1 – the internal handle of opening of a door;
2 – a door upholstery;
3 – пылевлагозащитная a film;
4 – a directing sealant of glass;
5 – directing glasses;
6 – back glass;
7 – a sealant of back glass of a door;
8 – glass;
9 – стеклоподъемник;
10 – the external handle of opening of a door;
11 – the door lock;
12 – the terminator of opening of a door;
13 – the door hinge.

Removal

The door fastens to a body of the car two hinges and the terminator of opening of a door. The terminator of opening of a door limits size of opening of a door.

Hollow rubber consolidation of a door is established on a ledge of a door and prevents moisture and dust penetration between a door and a body.

The lock of a door is connected by draughts to external and internal handles of opening of a door.

Стеклоподъемник with an electric drive consists of the mechanism стеклоподъемника with the glass fixed on it, a lobby directing glasses, the switch established in an armrest and a plastic frame, protecting all components.

The shock plate of the lock of a door can be adjusted for reliable and soft closing of a door.

PERFORMANCE ORDER
1. Turn out one screw of fastening external влагозащитной door strips.
2. Remove external влагозащитную a door strip.
3. Remove a door upholstery.
4. Remove the internal handle of unlocking of the lock of a door in a following order:

      – Disconnect from the handle two draughts;
      – Remove the internal handle of a door.
5. Remove пылевлагозащитную a film, gradually separating it from a door frame.
6. Remove directing sealant of glass.
7. Turn out one bolt and one screw of fastening central directing glasses.
8. Remove central directing glasses.
9. Remove back glass of a door.

10. Remove glass in a following order:

      – Turn out two bolts of fastening of glass to стеклоподъемнику;
      – Inclining and lifting a back part remove glass from door lateral aspect.

11. Through an aperture in the internal panel of a door turn out two nuts of fastening of the external handle of a door.
12. Remove the external handle of a door.
13. Turn out three screws of fastening of the lock of a door.
14. Through an aperture in the internal panel of a door remove the door lock.
15. Turn out six nuts of fastening стеклоподъемника.
16. Through an aperture in the internal panel of a door remove стеклоподъемник.
17. Through an aperture from outside hinges extend a plait of wires from a door.
18. Remove external молдинг glass fringings.
19. Remove the terminator of opening of a door in a following order:

      – Turn out a bolt of fastening of the terminator of opening of a door;
      – Through an aperture in the internal panel of a door remove the terminator of opening of a door.
20. Remove a door in a following order:

      – Turn out bolts of fastening of both hinges;
      – Remove a door from the car.

Installation

PERFORMANCE ORDER

1. Establish a door in a following order:

      – Establish properly a door on the car;
      – Screw bolts of fastening of both hinges.

The inhaling moment: 18–30 Nm

2. Establish the terminator of opening of a door in a following order:

      – Through an aperture in the internal panel of a door establish the terminator of opening of a door;
      – Screw a bolt of fastening of the terminator of opening of a door.
3. Establish external молдинг glass fringings.
4. From outside door hinges pass at a door a plait of wires.
5. Establish стеклоподъемник into place.
6. Screw six nuts of fastening стеклоподъемника.

The inhaling moment: 9–13 Nm

7. Will put the door lock through an aperture in the internal panel of a door.
8. Fix the lock of a door three screws.
9. Put to a door the external handle of a door.

10. Establish the external handle of a door in a following order:

      – Connect draughts of the lock for the external handle of a door;
      – Fix two nuts the external handle of a door.

11. Connect draught of the external handle of the lock of a door for the door lock.
12. Establish glass in a following order:

      – For greasing at glass installation use a soap solution;
      – Insert outside of a door at first a forward part has flown down, then, turning and lowering, establish glass at a door and arrange it on an arm стеклоподъемника.

The prevention

Be convinced that glass is correctly established in the directing.


13. Tighten two bolts of fastening of glass.

The inhaling moment: 2–3 Nm

14. If necessary, adjust glass position.
15. Establish back glass at a door.
16. Establish central directing glasses.
17. Establish directing sealant of glass.
18. Establish on a door пылевлагозащитную a film and deduce draughts of the internal handle of opening of the lock of a door from пылевлагозащитной films.
19. Establish the internal handle of a door in a following order:

      – Connect to the handle two draughts of the lock of a door.
20. Establish a door upholstery.
21. Establish external влагозащитную a door strip.
22. Move glass upwards against the stop.