KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
- 14. A body
   14.1. The inhaling moments
   14.2. A cowl
   14.3. A luggage carrier cover
   14.4. The hinge of a cover of a luggage carrier
   14.5. A luggage space door
   14.6. A gazonapolnennaja rack of support of a door of a luggage space
   14.7. The lock of a door of a luggage space
   14.8. The external handle of a door of a luggage space
   14.9. A forward door
   14.10. Vlagozashchitnoe consolidation of a door
   14.11. A back door
   14.12. The panel of devices
   14.13. A ceiling
   14.14. A lateral upholstery of a luggage carrier of five-door cars
   14.15. A back upholstery of a luggage carrier
   14.16. The top upholstery of a forward rack
   14.17. The bottom upholstery of the central rack
   14.18. The top upholstery of the central rack
   14.19. An upholstery of a back rack of four-door cars
   14.20. An upholstery of a back rack of five-door cars
   14.21. An upholstery of a forward door
   14.22. An overlay of a threshold of a forward door
   14.23. An upholstery of a back door
   14.24. An upholstery of a door of a luggage space
   14.25. An overlay of a threshold of a back door
   14.26. A back shelf
   14.27. An upholstery of an arch of a back wheel of four-door cars
   14.28. An upholstery of an arch of a back wheel of five-door cars
   14.29. A forward bumper
   14.30. A back bumper
   14.31. Forward seats
   14.32. An upholstery of a back of a forward seat
   14.33. An upholstery of a pillow of a forward seat
   14.34. A headrest
   14.35. The leaning back hinge of a forward seat
   14.36. Back sitting
   14.37. Seat belts
   14.38. Seat belts of a back seat
   14.39. Скоба fastenings of a back seat belt
   14.40. The distances designed on a plane, for check of distances between separate points of a body of the car
   14.41. Actual distances of check of distances between separate points of a body of the car
+ 15. Air central air
+ 16. The electric equipment







14.12. The panel of devices
THE GENERAL DATA

The panel of devices

1 – furnish of a combination of devices;
2 – a combination of devices;
3 – the central panel of furnish;
4 – a radio receiver;
5 – a ware box;
6 – the panel of devices;
7 – a heater air line;
8 – a ventilation air line.

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Remove a pillow of safety of the driver.
3. Remove a steering wheel, the switch of a signal of turn both the top and bottom casings of a steering column.
4. Turn out two bolts from both parties of a steering column which connect the panel of devices and a steering column. Lower a steering column downwards.
5. Turn away a nut of fastening of the handle of opening of the lock of a cowl and disconnect the handle from a cable of opening of the lock of a cowl.
6. Remove a combination of devices in a following order:

      – Turn out three screws and remove furnish of a combination of devices;
      – Turn out four bolts of fastening of a combination of devices;
      – Disconnect an electric socket from a back part of a combination of devices.
7. Remove the central panel of furnish and the control panel heating and ventilation.
8. Remove a radio receiver in a following order:

      
– Turn out four screws of fastening of a radio receiver;
      – Disconnect an electric socket from a back part of a radio receiver;
      – Disconnect a wire of the aerial from a back part of a radio receiver;
      – Remove a radio receiver.
9. Remove a ware box.

10. Turn out four bolts and uncover the left / right party of the T-shaped connector.

11. Turn out four bolts of fastening of the basis of the panel of devices.
12. Disconnect all sockets connecting the panel of devices and a plait of wires of the car.
13. Remove the panel of devices.

Installation

PERFORMANCE ORDER
1. Establish the panel of devices in the car. Before installation of the panel of devices be convinced that the steering column is established correctly through T-shaped draught with a plait of wires. Otherwise the steering column cannot be correctly established.
2. Connect sockets of a plait of wires and the panel of devices.
3. Screw four bolts of fastening of the left / right party of the basis of the panel of devices.

The inhaling moment: 18–25 Nm

4. Screw four bolts of fastening of the left / right party of the T-shaped connector.

The inhaling moment: 18–25 Nm

5. Establish a ware box.
6. Establish a radio receiver in a following order:

      – Connect an aerial wire to a back part of a radio receiver;
      – Connect an electric socket to a back part of a radio receiver;
      – Screw four screws of fastening of a radio receiver.
7. Establish the central panel of furnish and the control panel heating and ventilation.
8. Establish a combination of devices in a following order:

      – Connect an electric socket to a back part of a combination of devices;
      – Screw four bolts of fastening of a combination of devices;
      – Screw three screws of fastening of furnish of a combination of devices.
9. Establish the handle of opening of the lock of a cowl.

10. Screw two bolts from both parties of a steering column which connect the panel of devices and a steering column.

The inhaling moment: 18–26 Nm

11. Establish a steering wheel, the switch of a signal of turn both the top and bottom casings of a steering column.
12. Establish a pillow of safety of the driver.
13. Establish the central console.
14. Connect a wire to the negative plug of the storage battery.