KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
- 15. Air central air
   15.1. Specifications
   15.2. A contour of a central air of air
   15.3. Remarks at replacement of elements of a central air of air
   15.4. Connection of elements of a central air of air
   15.5. Safety measures
   15.6. Check of operational characteristics
   15.7. Diagnostics a central air of air with use of manometres
   15.8. Check of a backlash of coupling of the compressor of the conditioner
   15.9. Check of coupling of the compressor of the conditioner
   15.10. Oil for greasing of the compressor of the conditioner
   15.11. Check of level and доливка oils in the conditioner compressor
   15.12. The air filter of the evaporator
   15.13. The gauge of double pressure
   15.14. The conditioner compressor
   15.15. Condenser check
   15.16. Check of the fan of the condenser
   15.17. Check of the receiver \of a dryer
   15.18. Check of the thermostatic gauge (термистора)
   15.19. Check of the engine of the fan
   15.20. Check of the block of resistors of the engine of the fan
   15.21. The switch of giving of air in car salon
   15.22. The control panel air central air
+ 16. The electric equipment


Samsung LE32B450C7WXRU прошивка




15.10. Oil for greasing of the compressor of the conditioner
THE GENERAL DATA

Oil for greasing of the compressor of the conditioner circulates in system at compressor work. At replacement of any element of a central air of air, at considerable leak of a coolant, add in system oil that its volume has remained at initial level.

Oil volume: 120 sm3

Oil condition

Oil should not contain a moisture, a dust, metal particles etc.

Do not mix some oil of various types.

Moisture content in oil increases, if it remains opened on air long time. After oil use, the capacity with oil is necessary for closing immediately tightly.

To check level of oil or to add oil it is necessary at engine work on frequency of rotation of a cranked shaft of the engine idling and at high frequency of rotation of the fan.