KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
- 15. Air central air
   15.1. Specifications
   15.2. A contour of a central air of air
   15.3. Remarks at replacement of elements of a central air of air
   15.4. Connection of elements of a central air of air
   15.5. Safety measures
   15.6. Check of operational characteristics
   15.7. Diagnostics a central air of air with use of manometres
   15.8. Check of a backlash of coupling of the compressor of the conditioner
   15.9. Check of coupling of the compressor of the conditioner
   15.10. Oil for greasing of the compressor of the conditioner
   15.11. Check of level and доливка oils in the conditioner compressor
   15.12. The air filter of the evaporator
   15.13. The gauge of double pressure
   15.14. The conditioner compressor
   15.15. Condenser check
   15.16. Check of the fan of the condenser
   15.17. Check of the receiver \of a dryer
   15.18. Check of the thermostatic gauge (термистора)
   15.19. Check of the engine of the fan
   15.20. Check of the block of resistors of the engine of the fan
   15.21. The switch of giving of air in car salon
   15.22. The control panel air central air
+ 16. The electric equipment


порно онлайн бесплатно




15.11. Check of level and доливка oils in the conditioner compressor
PERFORMANCE ORDER
1. Stop the engine, discharge a central air of air and remove the conditioner compressor.
2. Merge oil from the conditioner compressor.
3. Measure volume of the merged oil. If it less than 70 sm3, means, there is an insignificant leak. Define a place of leak and repair or replace faulty details.

4. Check up degree of pollution of oil and fill in it in a following order:

      – If oil pure:

Discharge
Filling
About 70 sm3 Oil level in norm. Add the same quantity of oil, as well as it has been merged at a discharge.
Less than 70 sm3 Level of oil below norm. Add 70 sm3 of oil.

      – If oil is polluted by metal particles, clear a dryer / the receiver after coolant gymnastics.