KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
- 16. The electric equipment
   16.1. Specifications
   16.2. Electric chains
   + 16.3. The generator
   + 16.4. The storage battery
   16.5. A starter
   16.6. Check at проворачивании a cranked shaft not the heated-up engine
   16.7. Check of an electric chain of the traction relay
   16.8. Check of the traction relay
   16.9. Check of brushes and щеткодержателя
   16.10. Check of coils статора
   16.11. Rotor check
   16.12. Removal and starter installation
   16.13. Starter repair
   16.14. The multipurpose switch
   16.15. A sound signal
   16.16. The block of safety locks and the relay, established in car salon
   16.17. Check of the relay of the activator of the lock of a door
   16.18. Check of the switch of adjustment of position of an external rear-view mirror
   16.19. Check of the activator of position of an external rear-view mirror
   16.20. Engine check стеклоподъемника
   16.21. Check of a heater of back glass
   16.22. Repair of a current-carrying strip of a heater
   16.23. The engine of a screen wiper of a windscreen
   16.24. Стеклоомыватели
   16.25. Adjustment of light of headlights
   16.26. Adjustment of light of antifog headlights
   16.27. Safety pillows (SRS)
   16.28. Precautionary labels
   16.29. A pillow of safety of the driver and a spiral wire
   16.30. Check of a pillow of safety
   16.31. Check of a spiral wire (spring)
   16.32. A pillow of safety of the forward passenger
   + 16.33. Electric schemes







16.14. The multipurpose switch
THE GENERAL DATA

Removal and installation

At removal of the multipurpose switch on the cars equipped with a pillow of safety of the driver, observe special precautions.


The prevention

Do not assort or repair the block of a pillow of safety and a spiral wire.

Do not throw and do not strike a pillow of safety and a spiral wire, and also exclude them контактирование with water, lubricant or oil. In the presence of dents, cracks, deformations or rusts replace a pillow of safety and a spiral wire.

Transport a safety air cushion separately, a bag upwards. Have no on a safety pillow extraneous subjects which at expansion of a pillow of safety can put serious traumas.

At transportation do not place a hand on a safety pillow.

Do not subject a pillow of safety to temperature influence above 93 С.

After operation of a pillow of safety necessarily replace a spiral wire.

At a detachment of a socket of a spiral wire do not apply excessive efforts.

The removed pillow of safety should be stored in a pure, dry place.

Before installation of a spiral wire combine a label and indicator Neutral and establish forward wheels for movement directly forward. Establish a spiral wire on a steering column. If the label and the indicator is not combined properly, at turn the steering wheel will not turn on a full corner or the mechanism of a spiral wire therefore functioning of a pillow of safety of the driver will be broken will be broken.


Check

Check up conductivity between contacts of a socket of the multipurpose switch at switch work.

The illumination switch


The illumination switch

HU: a headlight of headlights
HL: a passing light of headlights
P: self-returnable position

The turn switch


The switch of a screen wiper and стеклоомывателя