KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
- 16. The electric equipment
   16.1. Specifications
   16.2. Electric chains
   + 16.3. The generator
   - 16.4. The storage battery
      16.4.1. Normal gymnastics of the storage battery
      16.4.2. The accelerated gymnastics of the storage battery
      16.4.3. Check of the storage battery
      16.4.4. Check of level of electrolit
      16.4.5. Check of density of electrolit
      16.4.6. Check of pressure of the storage battery
      16.4.7. Check of pressure of the storage battery under loading
      16.4.8. Check of the current consumed from the storage battery at switched off ignition
      16.4.9. Power failure check on connections of plugs of the storage battery
   16.5. A starter
   16.6. Check at проворачивании a cranked shaft not the heated-up engine
   16.7. Check of an electric chain of the traction relay
   16.8. Check of the traction relay
   16.9. Check of brushes and щеткодержателя
   16.10. Check of coils статора
   16.11. Rotor check
   16.12. Removal and starter installation
   16.13. Starter repair
   16.14. The multipurpose switch
   16.15. A sound signal
   16.16. The block of safety locks and the relay, established in car salon
   16.17. Check of the relay of the activator of the lock of a door
   16.18. Check of the switch of adjustment of position of an external rear-view mirror
   16.19. Check of the activator of position of an external rear-view mirror
   16.20. Engine check стеклоподъемника
   16.21. Check of a heater of back glass
   16.22. Repair of a current-carrying strip of a heater
   16.23. The engine of a screen wiper of a windscreen
   16.24. Стеклоомыватели
   16.25. Adjustment of light of headlights
   16.26. Adjustment of light of antifog headlights
   16.27. Safety pillows (SRS)
   16.28. Precautionary labels
   16.29. A pillow of safety of the driver and a spiral wire
   16.30. Check of a pillow of safety
   16.31. Check of a spiral wire (spring)
   16.32. A pillow of safety of the forward passenger
   + 16.33. Electric schemes







16.4.7. Check of pressure of the storage battery under loading
PERFORMANCE ORDER
1. Disconnect wires from the storage battery. The negative wire is necessary for disconnecting first of all and to connect in last turn. Check up that the top part and plugs of the storage battery pure.
2. By the digital voltmeter measure pressure on plugs of the storage battery. Be convinced that pressure shown by the digital voltmeter makes 12,4 In or more.
3. On 15 with connect to plugs of the storage battery loading with a consumed current 300 And, then wait for 5 mines for stabilisation of pressure of the storage battery.
4. Connect to plugs of the storage battery loading with a consumed current of equal 50 % from battery capacity, through 15 with measure pressure and disconnect loading.
5. Pressure of the storage battery changes depending on battery temperature at check carrying out.

Temperature of the storage battery, C
The minimum pressure, In
27
9,7
21
9,6
15
9,5
10
9,4
4
9,3
–1
9,1
–7
8,9
–12
8,7