KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
- 1.1. Short acquaintance to the car
   1.2. Keys
   1.3. Locks of doors
   1.4. An immobilizer
   1.5. Electric стеклоподъемники
   1.6. Seats
   1.7. Seat belts
   1.8. Back seat belts
   1.9. Safety pillows
   1.10. Components of system of pillows of safety
   1.11. A control lamp of a pillow of safety
   1.12. A luggage carrier door (5-door model)
   1.13. A luggage carrier cover
   1.14. A lamp of a luggage compartment
   1.15. A cowl
   1.16. Лючок a fuel tank
   1.17. A steering wheel
   1.18. Rear-view mirrors
   1.19. Salon illumination
   1.20. The salon equipment
   1.21. A digital watch
   1.22. Шторка a luggage carrier
   1.23. Power supplies socket
   1.24. The aerial
   1.25. The hatch in a roof
   1.26. The holder for sun glasses
   1.27. A cargo luggage grid
   1.28. The top luggage carrier
   1.29. The ignition switch
   1.30. Engine start-up
   1.31. A mechanical transmission
   1.32. An automatic transmission
   1.33. Brake system
   1.34. A lay brake
   1.35. The hydraulic amplifier of a steering
   1.36. An adjustable steering column
   1.37. A combination of devices
   1.38. Headlights
   1.39. Turn indexes
   1.40. The proof-reader of light of headlights
   1.41. Illumination of a day mode of operation
   1.42. Back antifog lanterns
   1.43. Screen wipers and стеклоомыватели
   1.44. A heater of back glass
   1.45. A heater of an external rear-view mirror
   1.46. Heating and ventilation system
   1.47. System work
   1.48. Information on tablets
   1.49. The emergency light alarm system
   1.50. Start-up of the engine from the storage battery of other car
   1.51. Safety locks
   1.52. Safety lock Memory
   1.53. Car towage
   1.54. Screen wiper brushes
   1.55. Replacement of lamps
   1.56. Care of appearance of the car
   1.57. Maintenance service
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







1.30. Engine start-up
PERFORMANCE ORDER
1. Be convinced that the lay brake is included.
Models with a mechanical transmission
2. Completely press a coupling pedal, and the gear change lever establish in position the NEUTRAL. During engine start-up hold a coupling pedal of completely pressed. The starter will not work for some models, if the coupling pedal is not completely pressed.
Models with an automatic transmission
2. Move the lever of switching of modes to position "Р" (parking). Completely press a brake pedal.
Also it is possible to start up the engine if the lever of switching of modes is in position "N" (neutral).
3. Turn the ignition key in position START and hold it in this position, while the engine will not be started up (but not longer 10), then a key release. At extremely low surrounding temperatures, more low–18 С or if the engine did not work within several days before departure warm up the engine without pressing an accelerator pedal. Without dependence from, whether the engine warm or cold is, at its start-up do not press an accelerator pedal.

The prevention

If during movement the engine at model with an automatic transmission has decayed, and the car thus continues to move, do not try to move the lever of switching of modes to position "Р" (parking). If it will be possible on traffic conditions on road, move the lever of switching of modes to position "N" (neutral), and then turn the ignition key in position START (Ignition) and try to start up the engine again.


The cold engine (temperature of a cooling liquid more low 0 С) is not started up

Difficulties in engine work can be caused overflow of cylinders (in cylinders there is a lot of fuel). In this case execute the following:

PERFORMANCE ORDER
1. Be convinced that the lay brake is included.
Models with a mechanical transmission
2. Completely press a coupling pedal, and the gear change lever establish in position "Neutral". During engine start-up hold a coupling pedal of completely pressed.
Models with an automatic transmission
2. Rearrange the lever of switching of modes in position "Р" (parking) or "N" (neutral). Completely press a brake pedal.
3. Against the stop press a pedal of an accelerator and hold it in this position.
4. Turn the ignition key in position START and hold it in this position (as much as possible 10). Simultaneously hold pressed an accelerator pedal. In such a way will pump out excessive fuel from engine cylinders.
5. As soon as the engine will be started up, frequency of rotation of a cranked shaft of the engine will sharply increase. Thus at once release a pedal of an accelerator and the ignition key.
6. If the engine was not started up yet, after it проворачивания a starter release an accelerator pedal.
7. Try to start up once again the engine, without pressing an accelerator pedal, having turned the ignition key in position START (it is maximum on 10).

The hot engine is not started up:

If there are difficulties at start-up of the hot engine (repeated attempts without pressing of a pedal of an accelerator have not crowned success), execute the following:

PERFORMANCE ORDER
1. Be convinced that the lay brake is included.
Models with a mechanical transmission
2. Completely press a coupling pedal, and the gear change lever establish in position "Neutral". During engine start-up hold a coupling pedal of completely pressed.
Models with an automatic transmission
2. Move the lever of switching of modes to position "Р" (parking) or "N" (neutral). Completely press a brake pedal.
3. Press approximately to half of course an accelerator pedal, turn the ignition key in position START and hold it in this position (as much as possible 10).
4. After engine start-up allow to it to work on frequency of rotation of idling approximately during 10 with, and then can begin movement.

The prevention

Do not include a starter for a while большее, than 10 with. If the engine then decays or is not started up at all, before following inclusion of a starter wait 5–10 with. The overload or starter misuse can cause its damage.


The starter will not work for some models if:

      – At models with an automatic transmission the mode "Р" (parking) or "N" (neutral) is not included;

      – At models with a mechanical transmission the coupling pedal is not pressed completely.

If the engine did not work for a long time, at its start-up the knock published by pushers of valves can be audible. This sound should stop, when the engine will heat up to working temperature. If knock has not stopped, the car should pass the technical control at authorised dealer Kia.