KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
- 1.1. Short acquaintance to the car
   1.2. Keys
   1.3. Locks of doors
   1.4. An immobilizer
   1.5. Electric стеклоподъемники
   1.6. Seats
   1.7. Seat belts
   1.8. Back seat belts
   1.9. Safety pillows
   1.10. Components of system of pillows of safety
   1.11. A control lamp of a pillow of safety
   1.12. A luggage carrier door (5-door model)
   1.13. A luggage carrier cover
   1.14. A lamp of a luggage compartment
   1.15. A cowl
   1.16. Лючок a fuel tank
   1.17. A steering wheel
   1.18. Rear-view mirrors
   1.19. Salon illumination
   1.20. The salon equipment
   1.21. A digital watch
   1.22. Шторка a luggage carrier
   1.23. Power supplies socket
   1.24. The aerial
   1.25. The hatch in a roof
   1.26. The holder for sun glasses
   1.27. A cargo luggage grid
   1.28. The top luggage carrier
   1.29. The ignition switch
   1.30. Engine start-up
   1.31. A mechanical transmission
   1.32. An automatic transmission
   1.33. Brake system
   1.34. A lay brake
   1.35. The hydraulic amplifier of a steering
   1.36. An adjustable steering column
   1.37. A combination of devices
   1.38. Headlights
   1.39. Turn indexes
   1.40. The proof-reader of light of headlights
   1.41. Illumination of a day mode of operation
   1.42. Back antifog lanterns
   1.43. Screen wipers and стеклоомыватели
   1.44. A heater of back glass
   1.45. A heater of an external rear-view mirror
   1.46. Heating and ventilation system
   1.47. System work
   1.48. Information on tablets
   1.49. The emergency light alarm system
   1.50. Start-up of the engine from the storage battery of other car
   1.51. Safety locks
   1.52. Safety lock Memory
   1.53. Car towage
   1.54. Screen wiper brushes
   1.55. Replacement of lamps
   1.56. Care of appearance of the car
   1.57. Maintenance service
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







1.47. System work

Ventilation

PERFORMANCE ORDER
1. Establish the handle of a choice of a mode in position.
2. Establish the handle of giving of air in demanded position.
3. Establish the handle of a regulator of temperature in demanded position.
4. Establish the handle of a regulator of frequency of rotation in the fan demanded position.

Heating

PERFORMANCE ORDER
1. Establish the handle of a choice of a mode in position.
2. Establish the handle of giving of air in demanded position.
3. Establish the handle of a regulator of temperature in demanded position.
4. Establish the handle of a regulator of frequency of rotation of the fan in demanded position

5. If it is necessary to warm salon and simultaneously to reduce humidity of air, include the conditioner.

6. If it is necessary that at level of the person there was cold air, include two-level work, having translated the handle of a choice of a mode in position.
7. If the windscreen has misted over, translate the handle of a choice of a mode in position.

The conditioner

All central airs of cars Kia are filled by coolant R134a which is not rendering harmful influence on environment and not destroying an ozone layer of atmosphere.

PERFORMANCE ORDER
1. Make engine start-up. Press the air conditioning button.
2. Establish the handle of a choice of a mode on an obverse position.
3. Establish the handle всасывания air on giving external or рециркулируемого air.
4. Establish the handle of a choice of temperature on demanded позици
5. Establish the handle of a regulator of frequency of rotation of the fan in demanded position.
6. Make adjustment of handles of management by the fan and temperature for maintenance of the maximum comfort. If it is necessary that at floor level there was warm air, include two-level work, having translated the handle of a choice of a mode in position 027 and establish the handle of a regulator of temperature so that the maximum comfort has been reached. If it is necessary to reach the greatest possible cooling, turn the handle of a regulator of temperature to the full to the left, the button of a choice of a mode – in position рециркуляции air, and the handle of a regulator of frequency of rotation of the fan establish for the maximum speed.

The prevention

If air central air at movement on lifting or slow movement in a dense steam of cars, often supervise temperature of a cooling liquid of the engine is included. The included central air can cause an engine overheat. If the temperature index signals about an engine overheat further it is possible to leave included only ventilation, having switched off thus the conditioner.


Defrosting, elimination запотевания a windscreen

Windscreen inside

PERFORMANCE ORDER
1. Establish a position of heating of a floor (floor-defrost) or simply position of heating (defrost).
2. If at present air-conditioning or giving of external fresh air is not required, press the corresponding button for cancellation of these functions.
3. Establish the demanded temperature.
4. Establish demanded frequency of rotation of the fan, except for a position "0" (zero).
5. The air conditioning joins automatically at installation of a position of giving of external (fresh) air.

The prevention

Do not use the given position at the working conditioner and very damp weather. The difference of temperatures of external air and a windscreen can lead запотеванию glasses and, hence, to visibility decrease.


External surface of a windscreen


PERFORMANCE ORDER
1. Establish simply a heating position (defrost).
2. Establish the fan handle on a position "3" or "4".
3. Establish temperature on a position of the maximum warmth.
4. The air conditioning joins depending on the found out size of temperature of air and giving of external (fresh) air is established. If at present air-conditioning or giving of external fresh air is not required, press the corresponding button for cancellation of these functions.
5. For the purpose of achievement of peak efficiency of elimination of an icing of a windscreen turn the handle of a regulator of temperature to the full to the right – on the maximum temperature, and the handle of a regulator of frequency of rotation of the fan establish for the maximum speed. If it is necessary for icing / elimination запотевания a windscreen to a floor warm air moved, establish a mode regulator in the given position.
6. Before the trip beginning it is necessary to remove all snow and ice from wind and back glasses, external rear-view mirrors and all lateral windows. Remove all snow and ice from a cowl and воздухозаборной ventilation lattices on a cowl to reach peak efficiency of heating of a windscreen and to lower probability of its icing and запотевания.

How to cancel function of a compulsory air conditioning and a position of giving of external (fresh) air at the included position of heating of a floor and simple heating (floor-defrost and defrost)

If you choose position Floor-Defrost or Defrost the system automatically includes an air conditioning and there is a choice of a position of giving of external (fresh) air.

If you use at present one of the above-stated modes and do not require conditioned or external fresh air, you can switch off system work as follows:

      – Establish a regulator of management of frequency of rotation of the fan on a position 0 (zero);
      – Turn the handle of installation of a mode in position of heating 030;
      – Press the button рециркуляции air 031 not less than 5 times on 3 with. After that the light indicator of the button рециркуляции air blinks 3 times in 0,5 – second intervals.

If it is necessary to renew work of an automatic central air of air and giving of external (fresh) air, carry out identical procedure.

Arrive in the identical way if it is necessary to return on a position of compulsory giving of external (fresh) air at engine start-up.