KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
- 2. Engines A3E, А5D
   2.1. Specifications
   2.2. Compression check
   2.3. Camshafts
   2.4. Pistons and rods
   2.5. A cranked shaft
   2.6. Check шатунных and radical loose leaves
   2.7. The air filter (ACL)
   2.8. An accelerator cable
   2.9. A head of the block of cylinders
   2.10. Check of valves
   2.11. Check of a saddle of the valve
   2.12. Check of a spring of the valve
   2.13. A gear belt
   2.14. System of release of the fulfilled gases
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







2.12. Check of a spring of the valve
PERFORMANCE ORDER
1. Examine each spring of the valve on absence of cracks and damages.
2. Measure length of a spring in a free condition. Establish a spring on a flat horizontal surface and measure a deviation of the top part of a spring from a vertical plane.
Valve spring, mm
A5D
A3E
 Length of a spring a free condition
The nominal
43,1
45,5
The minimum
42,9
45,3
Deviation of the top part of a spring from a vertical plane
The maximum
1,13
1,19