KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
- 2. Engines A3E, А5D
   2.1. Specifications
   2.2. Compression check
   2.3. Camshafts
   2.4. Pistons and rods
   2.5. A cranked shaft
   2.6. Check шатунных and radical loose leaves
   2.7. The air filter (ACL)
   2.8. An accelerator cable
   2.9. A head of the block of cylinders
   2.10. Check of valves
   2.11. Check of a saddle of the valve
   2.12. Check of a spring of the valve
   2.13. A gear belt
   2.14. System of release of the fulfilled gases
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment




Интернет магазин комплектующих для ноутбуков по материалам nbparts18.ru.
Pim системы подробности здесь.
Тренажер петли также читайте.



2.14. System of release of the fulfilled gases
THE GENERAL DATA

System of release of the fulfilled gases

1 – the main muffler;
2 – apertures for bolts of fastening of flanges, 37–52 Nm;
3 – the preliminary muffler;
4 – a connecting flange And;
5 – apertures for bolts of fastening of flanges, 37–52 Nm;
6 – a connecting flange In;
7 – a reception exhaust pipe;
8 – bolts of fastening of an arm, 37–52 Nm;
9 – arm fastening to a reception exhaust pipe, 21–27 Nm;
10 – a bolt, 37–52 Nm;
11 – каталитический neutralizer;
12 – fastening hairpins catalytic neutralizer, 37–52 Nm

Removal

PERFORMANCE ORDER
1. Remove a reception exhaust pipe.
2. Remove каталитический neutralizer.
3. Remove preliminary and main mufflers.

Installation

Installation is spent to sequences, return to removal, taking into account the following.

Establish a reception exhaust pipe as follows:

PERFORMANCE ORDER
1. Establish a connecting flange And and temporarily fix it.
2. Establish an arm In and temporarily fix it.
3. Tighten bolts of fastening of a connecting flange And the moment 37–52 Nm.
4. Check up arm connection In and pipes.
5. Tighten bolts of fastening of an arm During the moment 37–52 Nm.