KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
- 2. Engines A3E, А5D
   2.1. Specifications
   2.2. Compression check
   2.3. Camshafts
   2.4. Pistons and rods
   2.5. A cranked shaft
   2.6. Check шатунных and radical loose leaves
   2.7. The air filter (ACL)
   2.8. An accelerator cable
   2.9. A head of the block of cylinders
   2.10. Check of valves
   2.11. Check of a saddle of the valve
   2.12. Check of a spring of the valve
   2.13. A gear belt
   2.14. System of release of the fulfilled gases
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







2.7. The air filter (ACL)
THE GENERAL DATA

Remove all elements in the sequence shown in drawing.

The air filter (ACL) and elements of a motor compartment

1 – a nut, 7,8–11 Nanometers;
2 – заборник fresh air;
3 – a bolt, 7,8–11 Nanometers;
4 – knot of the air filter;
5 – an accelerator cable

Check of a filtering element of the air filter

Check up filtering element of the air filter on absence of excessive pollution, damage or hit on it oils.

The prevention

For clearing of a filtering element use compressed air, submitting it from the interior of a filtering element. If necessary, replace filtering element of the air filter.