KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. A cooling liquid
   4.3. Replacement of a cooling liquid
   4.4. The water pump
   4.5. A radiator
   4.6. Check of tightness of system of cooling
   4.7. The engine of the fan of a radiator
   4.8. Check of a cover of a radiator
   4.9. The valve of return pressure
   4.10. The thermostat
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







4.3. Replacement of a cooling liquid
THE GENERAL DATA

The prevention

Do not uncover a radiator on the hot engine as leaving steams can lead to strong burns.

Close a cover of a radiator thick rags and slowly turn away a cover before occurrence of hissing of leaving steam. After the steam-out termination slowly turn on, and uncover a radiator.

Do not use as a cooling liquid alcohol or cooling liquid on a basis метанола.

Use only the distilled water in a mix with antifreeze.


PERFORMANCE ORDER
1. Uncover a radiator and turn out a stopper plum of a cooling liquid.
2. Merge cooling liquid in the suitable container.
3. Wash out cooling system a stream at its finest and merge water from cooling system.
4. Screw into place a stopper plum of a cooling liquid.

5. Fill in cooling liquid on a basis этиленгликоля in cooling system.

Capacity of system of cooling: 6 l

6. Start up the engine with an open cover of a radiator before warming up of the top hose of a radiator.
7. At engine work on frequency of idling add cooling liquid while it will not reach a bulk mouth of a radiator.
8. Establish a radiator cover.
9. Cool the engine and check up level of a cooling liquid.