KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. A cooling liquid
   4.3. Replacement of a cooling liquid
   4.4. The water pump
   4.5. A radiator
   4.6. Check of tightness of system of cooling
   4.7. The engine of the fan of a radiator
   4.8. Check of a cover of a radiator
   4.9. The valve of return pressure
   4.10. The thermostat
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







4.5. A radiator
THE GENERAL DATA

Sequence of removal of a radiator

1 – a radiator;
2 – a radiator arm;
3 – a radiator hose;
4 – a hose of a broad tank;
5 – a socket of the fan of a radiator;
6 – the radiator fan;
7 – a hose of an oil radiator;
8 – a radiator hose.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove заборник fresh air.
3. Merge cooling liquid in the suitable container.
4. Remove all details in the sequence shown in drawing.

Check

PERFORMANCE ORDER
1. Check up a radiator on absence of cracks, damages and absence of leaks.
2. Check up on absence погнутых radiator plates. If necessary, using a hairbrush, straighten platinum.
3. Check up a condition of entrance and target branch pipes of a radiator.

Installation

PERFORMANCE ORDER
1. Installation is spent to sequences, return to removal.
2. Connect a wire to the negative plug of the storage battery.
3. Fill in in cooling system necessary quantity of a demanded cooling liquid.
4. Start up the engine and check up absence of leaks from cooling system.