KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. A cooling liquid
   4.3. Replacement of a cooling liquid
   4.4. The water pump
   4.5. A radiator
   4.6. Check of tightness of system of cooling
   4.7. The engine of the fan of a radiator
   4.8. Check of a cover of a radiator
   4.9. The valve of return pressure
   4.10. The thermostat
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







4.7. The engine of the fan of a radiator
THE GENERAL DATA

Sequence of removal of the fan of a radiator

1 – a socket of the fan of a radiator;
2 – a bolt, 7,8–11 Nm;
3 – a casing of the fan of a radiator;
4 – the radiator fan;
5 – the engine of the fan of a radiator.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Merge cooling liquid in the suitable container.
3. Remove заборник fresh air.
4. Disconnect a socket from the engine of the fan of a radiator.
5. Loosen the a collar also remove the top hose of a radiator.
6. Turn out two top bolts of fastening of a casing of the fan of a radiator.
7. Turn out two bottom bolts of fastening of a casing of the fan of a radiator.
8. Lift and remove a casing of the fan of a radiator from a motor compartment.
9. Turn out a nut and remove the radiator fan.
10. Turn out three bolts and nuts and remove the engine of the fan of a radiator.

Installation

Installation is spent to sequences, return to removal.