KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. A corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. The gauge of a measuring instrument of the expense of air
   5.6. The detonation gauge
   5.7. The gauge of position throttle заслонки
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of pressure of forward and back warmed gauges of oxygen
   5.11. Check of forward and back warmed gauges of oxygen
   5.12. Pressure removal in fuel system
   5.13. Топливопроводы
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel atomizers
   5.18. Quick-detachable connections
   5.19. The fuel pump
   5.20. A fuel tank
   5.21. Check of system of ventilation картера (PCV)
   5.22. Check of system of catching of steams of fuel
   5.23. Check of the valve of system of catching of steams of fuel
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







5.15. Check of residual pressure in fuel system
PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.

The prevention

The fuel system remains under pressure, even after engine deenergizing, therefore before a detachment of pipelines it is necessary to remove pressure in fuel system.


2. Remove pressure in fuel system.
3. Lift the car.
4. Connect measuring device OK2A1 131 001 And to the fuel filter.
5. Connect a wire to the negative plug of the storage battery.
6. An additional wire connect plugs FUEL PUMP (the fuel pump) and In + a diagnostic socket.
7. Include ignition no more than on 10 with therefore the fuel pump will start to work and will create demanded pressure in fuel system. If ignition to leave included more than on 10 with, the additional wire will strongly heat up. Check up absence of leaks of fuel from fuel system.
8. Switch off ignition and remove additional a wire connecting the plugs of a diagnostic socket.
9. Through 25 mines check up pressure in fuel system.

Residual pressure in fuel system: 180 кПа

10. If pressure less demanded check up following components:

      – The fuel pump;
      – A pressure regulator;
      – Fuel atomizers.