KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. A corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. The gauge of a measuring instrument of the expense of air
   5.6. The detonation gauge
   5.7. The gauge of position throttle заслонки
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of pressure of forward and back warmed gauges of oxygen
   5.11. Check of forward and back warmed gauges of oxygen
   5.12. Pressure removal in fuel system
   5.13. Топливопроводы
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel atomizers
   5.18. Quick-detachable connections
   5.19. The fuel pump
   5.20. A fuel tank
   5.21. Check of system of ventilation картера (PCV)
   5.22. Check of system of catching of steams of fuel
   5.23. Check of the valve of system of catching of steams of fuel
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







5.17. Check of fuel atomizers
PERFORMANCE ORDER
1. Start up the engine and warm up it to normal working temperature. Leave the engine to work on frequency of rotation of idling.
2. A stethoscope or a screw-driver listen to the sounds created by atomizers at their work.

The prevention

Gasoline is explosive, therefore at work with elements of fuel system provide normal ventilation of a workplace, do not use fire, the sparking devices open by fire-dangerous light devices and do not smoke.

Be convinced that fuel atomizers are reliably fixed on a fuel highway that will exclude their moving and possible damage.


3. In the absence of the sounds created by atomizers at their work measure resistance of atomizers.
4. If resistance of atomizers is perfectly in order, check up integrity of electric chains between fuel atomizers and contacts 47, 48, 49, and 50 sockets of the electronic block of engine management.

Check of tightness of fuel atomizers

PERFORMANCE ORDER
1. Remove atomizers together with a fuel highway.
2. For fuel giving to atomizers, a hose connect a fuel highway to the pipeline of giving of fuel.
3. An additional wire connect plugs FUEL PUMP (the fuel pump) and In + a diagnostic socket.
4. Include ignition.
5. Incline fuel atomizers at an angle 60 and check up that there are no leaks of fuel from atomizers.
6. In the presence of leaks replace an atomizer.
7. Switch off ignition and remove an additional wire.

Check of productivity of fuel atomizers

PERFORMANCE ORDER
1. Remove atomizers together with a fuel highway.
2. For fuel giving to atomizers a hose connect a fuel highway to the pipeline of giving of fuel.
3. Connect sockets to atomizers.
4. An additional wire connect atomizers to a wire (BRN) the block of management and weight.
5. Include ignition.
6. Using a measured vessel measure fuel volume sprayed by an atomizer for 1 minute

Productivity of a fuel atomizer:
Engine A3E: 180 sm3 / of mines
Engine A5D: 190 sm3 / of mines
7. If productivity of an atomizer differs from demanded, replace an atomizer.

The prevention

At repeated installation of a fuel highway and atomizers use new sealing rings, preliminary having greased with their thin layer of engine oil.


Check of resistance of fuel atomizers

PERFORMANCE ORDER
1. Disconnect sockets from atomizers.
2. By an ohmmeter measure resistance of each atomizer.

Resistance: 13,5–15,5 Ohm at 20С

3. If resistance of an atomizer differs from demanded, replace an atomizer.