Since 2000 of release

Repair and car operation

Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. A corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. The gauge of a measuring instrument of the expense of air
   5.6. The detonation gauge
   5.7. The gauge of position throttle заслонки
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of pressure of forward and back warmed gauges of oxygen
   5.11. Check of forward and back warmed gauges of oxygen
   5.12. Pressure removal in fuel system
   5.13. Топливопроводы
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel atomizers
   5.18. Quick-detachable connections
   5.19. The fuel pump
   5.20. A fuel tank
   5.21. Check of system of ventilation картера (PCV)
   5.22. Check of system of catching of steams of fuel
   5.23. Check of the valve of system of catching of steams of fuel
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment

5.18. Quick-detachable connections

The prevention

The fuel system remains under pressure even after engine deenergizing, therefore before a detachment of pipelines, it is necessary to remove pressure in fuel system.


1. Pull a flange of quick-detachable connection over a pipe before its accurate fixing (click).
2. After connection of hoses pull every which way (And and) two parts of a quick-detachable socket and be convinced that socket fixing is executed reliably, thus do not press holders of connection.


1. Remove pressure in fuel system.
2. Press a flange of quick-detachable connection in a direction And.
3. Compress both holders and separate connection, having pulled a flange in V.Pri's direction separation do not apply the big efforts.