KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. A corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. The gauge of a measuring instrument of the expense of air
   5.6. The detonation gauge
   5.7. The gauge of position throttle заслонки
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of pressure of forward and back warmed gauges of oxygen
   5.11. Check of forward and back warmed gauges of oxygen
   5.12. Pressure removal in fuel system
   5.13. Топливопроводы
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel atomizers
   5.18. Quick-detachable connections
   5.19. The fuel pump
   5.20. A fuel tank
   5.21. Check of system of ventilation картера (PCV)
   5.22. Check of system of catching of steams of fuel
   5.23. Check of the valve of system of catching of steams of fuel
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







5.19. The fuel pump

Check

PERFORMANCE ORDER
1. An additional wire connect plugs FUEL PUMP (the fuel pump) and In + a diagnostic socket.
2. Uncover with топливоналивной mouths of a fuel tank.
3. Include ignition.
4. Define, whether the fuel pump works, listening to noise created by the pump through топливоналивную a mouth of a fuel tank.
5. Connect a wire to the negative plug of the storage battery.

The prevention

The fuel system remains under pressure even after engine deenergizing, therefore before a detachment of pipelines, it is necessary to remove pressure in fuel system.


6. An additional wire connect plugs FUEL PUMP (the fuel pump) and In + a diagnostic socket.
7. Include ignition.

8. Check up the maximum pressure created by the fuel pump.

The maximum pressure created by the fuel pump: 450–650 кПа

9. If the pressure created by the fuel pump does not correspond demanded, replace the block of giving of fuel.