KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. A coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. A casing of coupling and press a disk
   7.8. Replacement of the central bearing
   7.9. A coupling pedal
   7.10. A coupling cable
   7.11. The bearing of deenergizing of coupling
   7.12. A plug of deenergizing of coupling \squeezing the lever
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







7.10. A coupling cable

Removal

PERFORMANCE ORDER
1. Turn away adjusting nuts on the squeezing lever so that it was possible to remove a cable from the squeezing lever.
2. Remove an arm of fastening of a cover of a cable of coupling to a transmission.
3. Remove a clip, крепящий a cable cover to an arm of a pedal of coupling.
4. Pull a cable upwards and disconnect it from a hook of a pedal of coupling.
5. If necessary turn away a nut and remove an arm.
6. Through an aperture in a partition of a motor compartment extend a coupling cable.

Check

Check up following details and, if necessary, replace them.

PERFORMANCE ORDER
1. The worn out or damaged plugs.
2. The deformed pedal of coupling.
3. The worn out or damaged rubber overlay of a pedal of coupling.
4. The damaged cable of coupling.
5. Incorrectly functioning cable of coupling.

Installation

Installation is spent to sequences, return to removal.

Adjust a free wheeling of a pedal of coupling.