KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. A coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. A casing of coupling and press a disk
   7.8. Replacement of the central bearing
   7.9. A coupling pedal
   7.10. A coupling cable
   7.11. The bearing of deenergizing of coupling
   7.12. A plug of deenergizing of coupling \squeezing the lever
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







7.12. A plug of deenergizing of coupling / squeezing the lever

Removal

PERFORMANCE ORDER
1. Remove a transmission.
2. Turn out a bolt of fastening of a plug of deenergizing of coupling.
3. Remove the bearing of deenergizing of coupling.
4. Remove a returnable spring of the squeezing lever.
5. Move squeezing the lever upwards from a plug of deenergizing of coupling and remove a plug.
6. Take squeezing the lever from картера couplings.
7. Remove plugs of the squeezing lever from картера couplings.

Installation


The prevention

Fill internal deepening in the plug with greasing XG-1-C.


PERFORMANCE ORDER
1. Establish plugs of the squeezing lever.
2. Establish the bearing of deenergizing of coupling.
3. Insert a plug of deenergizing of coupling and establish squeezing the lever.
4. Establish a returnable spring of the squeezing lever.
5. Combine apertures under a bolt in a plug of deenergizing of coupling and a shaft of the squeezing lever.

6. Screw a bolt of fastening of a plug of deenergizing of coupling and tighten its demanded moment.

The inhaling moment: 35–41 Nm

7. Establish a transmission.