KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. A coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. A casing of coupling and press a disk
   7.8. Replacement of the central bearing
   7.9. A coupling pedal
   7.10. A coupling cable
   7.11. The bearing of deenergizing of coupling
   7.12. A plug of deenergizing of coupling \squeezing the lever
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







7.2. Adjustment of a pedal of coupling
PERFORMANCE ORDER

1. A hand press a pedal of coupling before occurrence of notable resistance and measure free wheeling size.

Pedal free wheeling: 9–15 mm

2. Wring out squeezing the lever, separate from it a pusher and rotating an adjusting nut In adjust a backlash And.

Backlash And: 1,5–2,5 mm

3. After free wheeling adjustment press a pedal of coupling and measure distance from a forward surface of a pedal to a carpet covering.

Distance from a forward surface of a pedal to a carpet covering: 83,2 mm