KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. A coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. A casing of coupling and press a disk
   7.8. Replacement of the central bearing
   7.9. A coupling pedal
   7.10. A coupling cable
   7.11. The bearing of deenergizing of coupling
   7.12. A plug of deenergizing of coupling \squeezing the lever
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







7.4. A coupling disk

Removal


The prevention

Exclude hit of oil or any lubricant on frictional overlays of a disk of coupling, coupling work otherwise will be broken.


PERFORMANCE ORDER
1. Remove a transmission.
2. Note mutual position of a casing of coupling and a flywheel.

The prevention

Gradually on a diagonal ослабьте bolts of fastening of coupling in gathering, turning each bolt on S a turn until action диафрагменной springs will stop and bolts can be unscrewed manually.


3. Remove a casing of coupling with a press disk and a coupling disk. For an exception проворачивания a flywheel at a reversing of bolts establish special tool OK130 111 002 for blocking of a flywheel from проворачивания.

The prevention

It is desirable to remove a flywheel and to check up a back sealing ring of a cranked shaft on absence of leaks. If necessary replace a sealing ring.