Since 2000 of release

Repair and car operation

Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. A coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. A casing of coupling and press a disk
   7.8. Replacement of the central bearing
   7.9. A coupling pedal
   7.10. A coupling cable
   7.11. The bearing of deenergizing of coupling
   7.12. A plug of deenergizing of coupling \squeezing the lever
+ 8. A transmission
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment

7.8. Replacement of the central bearing


1. Remove a flywheel.
2. A hand finger turn the bearing with the appendix of the maximum effort in an axial direction. If the bearing is turned hardly, replace it.
3. A special stripper take the central bearing from a flywheel.


The prevention

At installation of the central bearing the mandrel it is necessary опирать on an external ring of the bearing. Any contact to an internal ring will damage the bearing.

1. A hammer and tubular оправкой establish the central bearing.
2. Establish a flywheel.