Since 2000 of release

Repair and car operation

Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. A transmission
   - 8.1. A mechanical transmission
      8.1.1. Specifications
      8.1.2. Check of level of oil
      8.1.3. Oil replacement
      8.1.4. Replacement of an oil sealing ring
      8.1.5. Removal and transmission installation
      8.1.6. Dismantling, check and transmission assemblage
      8.1.7. Carter couplings and components картера transmissions
      8.1.8. A primary shaft of a transmission
      8.1.9. A secondary shaft of a transmission
      8.1.10. A choice of adjusting linings
      8.1.11. Differential
      8.1.12. The gear change mechanism
   + 8.2. Automatic transmission F4E–K
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment

8.1.3. Oil replacement
1. Lift the car and fix it in horizontal position.

The prevention

At check of level of oil the car should be in horizontal position.

2. Turn out a stopper the oil plum, located in an end face of a transmission and merge oil in the suitable container.

The inhaling moment: 40–58 Nm
3. Establish on a stopper a new washer and screw a stopper oil plum into place.
4. Through an aperture for installation of the mechanism of a drive of a speedometer fill in in a transmission necessary quantity of demanded oil.

Grade: GL-4
Viscosity: SAE 75W-90
Capacity: 2,80 l

5. Start up the engine and leave it to work before oil warming up in a transmission. Check up absence of leaks of oil from a transmission.
6. Lower the car.