KIA RIO

Since 2000 of release

Repair and car operation

8.2.18. The switch of operating modes of transmission O/D

Check

PERFORMANCE ORDER

1. Include ignition. 2. Be convinced that indicator O/D OFF is not highlighted. Press the switch. 3. If the indicator does not work properly, continue check.

Pressure check

PERFORMANCE ORDER

1. Remove the central console. 2. Include ignition. 3. Measure pressure on contacts of a socket of switch O/D. Switch position Socket contacts Normal, In 1 4 Pressed, In IN + 0 In +: Pressure of the storage battery 0 0 4. If pressure on contacts of a socket of the switch differ from demanded, проворьте conductivity in switch O/D

Conductivity check

PERFORMANCE ORDER

1. Disconnect a wire from the negative plug of the storage battery. 2. Disconnect a socket from switch O/D. 3. Check up conductivity of switch O/D on contacts of socket H-05. Switch position Socket contacts 1 4 The normal Are opened The pressed Are closed 4. Otherwise replace the handle of the lever of the selector. 5. If the switch works normally, check up the electric chain going to the block of management by a transmission. 6. Connect switch O/D socket. 7. Establish the central console. 8. Connect a wire to the negative plug of the storage battery.