KIA RIO

Since 2000 of release

Repair and car operation

Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. A transmission
   + 8.1. A mechanical transmission
   - 8.2. Automatic transmission F4E–K
      8.2.1. Specifications
      8.2.2. Check of work and adjustment of position of the lever of the selector
      8.2.3. Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
      8.2.4. Time lag testing (Lag test)
      8.2.5. Pressure check трансмиссионной liquids
      8.2.6. Check of level and liquid replacement in an automatic transmission
      8.2.7. Procedure of replacement of a liquid in the converter of an automatic transmission
      8.2.8. Leaks of a liquid from an automatic transmission
      8.2.9. Replacement of oil sealing rings
      8.2.10. Removal and installation of an automatic transmission
      8.2.11. Repair of an automatic transmission
      8.2.12. A radiator of cooling of a liquid of an automatic transmission
      8.2.13. The block of valves
      8.2.14. The case of regulating valves
      8.2.15. The oil pump
      8.2.16. Check of resistance of the gauge of frequency of rotation of an entrance shaft \of a turbine wheel
      8.2.17. Check of resistance of the gauge of speed
      8.2.18. The switch of operating modes of transmission O\D
      8.2.19. The switch of a range of a transmission
      8.2.20. The gauge of temperature of an automatic transmission
      8.2.21. Electromagnetic valves
      8.2.22. The linear electromagnetic valve
      8.2.23. The selector lever
      8.2.24. Repair of the lever of the selector
      8.2.25. Check of functioning of the mechanism of blocking of the lever of the selector
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment

8.2.19. The switch of a range of a transmission
Check

PERFORMANCE ORDER

1. Check up that the starter works only at key turn in the lock of ignition position START and the selector lever in positions Р or N.

2. Check up that backing lanterns are lighted only at moving of the lever of the selector to position R and a key to the ignition lock in position START.

3. Check up that position of the lever of the selector and the indicator of the chosen position coincide.

4. Otherwise check up the switch of a range of a transmission.

Conductivity check

PERFORMANCE ORDER

1. Disconnect a wire from the negative plug of the storage battery.

2. Disconnect a socket of the switch of a range of a transmission.

3. Check up conductivity between contacts of the switch of a range of a transmission.

4. If conductivity does not correspond demanded, adjust or replace the switch of a range of a transmission.

5. Connect a socket of the switch of a range of a transmission.

6. Connect a wire to the negative plug of the storage battery.