KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. A transmission
   + 8.1. A mechanical transmission
   - 8.2. Automatic transmission F4E–K
      8.2.1. Specifications
      8.2.2. Check of work and adjustment of position of the lever of the selector
      8.2.3. Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
      8.2.4. Time lag testing (Lag test)
      8.2.5. Pressure check трансмиссионной liquids
      8.2.6. Check of level and liquid replacement in an automatic transmission
      8.2.7. Procedure of replacement of a liquid in the converter of an automatic transmission
      8.2.8. Leaks of a liquid from an automatic transmission
      8.2.9. Replacement of oil sealing rings
      8.2.10. Removal and installation of an automatic transmission
      8.2.11. Repair of an automatic transmission
      8.2.12. A radiator of cooling of a liquid of an automatic transmission
      8.2.13. The block of valves
      8.2.14. The case of regulating valves
      8.2.15. The oil pump
      8.2.16. Check of resistance of the gauge of frequency of rotation of an entrance shaft \of a turbine wheel
      8.2.17. Check of resistance of the gauge of speed
      8.2.18. The switch of operating modes of transmission O\D
      8.2.19. The switch of a range of a transmission
      8.2.20. The gauge of temperature of an automatic transmission
      8.2.21. Electromagnetic valves
      8.2.22. The linear electromagnetic valve
      8.2.23. The selector lever
      8.2.24. Repair of the lever of the selector
      8.2.25. Check of functioning of the mechanism of blocking of the lever of the selector
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







8.2.23. The selector lever
THE GENERAL DATA

The selector lever

1 – the central panel;
2 – an ashtray;
3 – forward section of the central console;
4 – the central console;
5 – the selector lever;
6 – an arm;
7 – a socket cigarette Lighter;
8 – a selector cable;
9 – a selector cable;
10 – an adjusting plate;
11 – a socket.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove an ashtray and turn out two screws.
3. Disconnect a socket cigarette Lighter and remove the central panel.
4. Remove forward section of the central console and the central console.
5. Move the selector lever to the River position
6. Turn out two bolts of fastening of a cover of a cable of the selector.
7. Turn out nuts of fastening of a cable of the selector.
8. Turn out nuts of fastening of a cable of blocking and disconnect it from the blocking lock.
9. Remove an arm.

10. Disconnect a socket of the switch of operating modes O/D.

11. Turn out nuts of fastening of a basic plate of the selector and remove the selector lever in gathering.

Installation

PERFORMANCE ORDER
1. Establish the lever of the selector and fix a basic plate of the selector nuts.

The inhaling moment: 15,7–22,6 Nm


The prevention

At installation of a basic plate of the selector of the marksman on a plate should be directed to a forward part of the car.


2. Establish an arm.
3. Connect a socket of the switch of operating modes O/D.
4. Move the selector lever to the River position

5. Tighten nuts of fastening of a basic plate of the lever of the selector.

The inhaling moment: 6,8–9,8 Nm

6. Tighten a bolt of fastening of a cable of the selector and a nut.

The inhaling moment: 6,8–9,8 Nm

7. Tighten nuts of fastening of a cable of blocking.

The inhaling moment: 9,8–14,7 Nm

8. Establish forward section of the central console and the central console.
9. Establish the central panel and connect an illumination socket cigarette Lighter.
10. Establish an ashtray.
11. Connect a wire to the negative plug of the storage battery.
12. Check up correctness of work of the lever of the selector.