KIA RIO

Since 2000 of release

Repair and car operation



Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. A transmission
   + 8.1. A mechanical transmission
   - 8.2. Automatic transmission F4E–K
      8.2.1. Specifications
      8.2.2. Check of work and adjustment of position of the lever of the selector
      8.2.3. Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
      8.2.4. Time lag testing (Lag test)
      8.2.5. Pressure check трансмиссионной liquids
      8.2.6. Check of level and liquid replacement in an automatic transmission
      8.2.7. Procedure of replacement of a liquid in the converter of an automatic transmission
      8.2.8. Leaks of a liquid from an automatic transmission
      8.2.9. Replacement of oil sealing rings
      8.2.10. Removal and installation of an automatic transmission
      8.2.11. Repair of an automatic transmission
      8.2.12. A radiator of cooling of a liquid of an automatic transmission
      8.2.13. The block of valves
      8.2.14. The case of regulating valves
      8.2.15. The oil pump
      8.2.16. Check of resistance of the gauge of frequency of rotation of an entrance shaft \of a turbine wheel
      8.2.17. Check of resistance of the gauge of speed
      8.2.18. The switch of operating modes of transmission O\D
      8.2.19. The switch of a range of a transmission
      8.2.20. The gauge of temperature of an automatic transmission
      8.2.21. Electromagnetic valves
      8.2.22. The linear electromagnetic valve
      8.2.23. The selector lever
      8.2.24. Repair of the lever of the selector
      8.2.25. Check of functioning of the mechanism of blocking of the lever of the selector
+ 9. Axes and power shafts
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment







8.2.6. Check of level and liquid replacement in an automatic transmission
THE GENERAL DATA

The prevention

The car should stand on an equal horizontal surface.


Check of level of a liquid

PERFORMANCE ORDER
1. Tighten a lay brake and block wheels an emphasis for an exception качения the car.
2. Start up the engine before warming up of a transmission to temperature 60~70C.
3. At the working engine press a pedal of a brake and consistently move the lever of the selector from position Р to positions R> N> D> 1> 2> D> N> R> P, holding the lever in each position no more than 3 with.

The prevention

Use measurements on scale COOL (20C) only as rough value.


4. Check up level of a liquid which should be between labels HOT (65C). If necessary add necessary quantity of a demanded liquid.

Type of a liquid for an automatic transmission: SK ATF SP–III or DIAMOND ATF SP–III

Check of a condition of a liquid


The prevention

Carefully check up a liquid condition in an automatic transmission and define, whether it is valid an automatic transmission should be dismantled.

If the liquid in an automatic transmission is polluted and has burnt slightly, it specifies in the burnt plates or brake tapes.


PERFORMANCE ORDER
1. Check up colour of a liquid in an automatic transmission.
2. Check up a liquid in an automatic transmission on presence of unusual smells. For definition of change of colour and a liquid smell compare it to a fresh liquid.

Liquid replacement

PERFORMANCE ORDER
1. Establish the pallet for liquid gathering under a transmission.
2. Turn out a stopper and merge all liquid from an automatic transmission.
3. Screw a stopper into place.

The inhaling moment: 39–54 Nm

4. Take щуп for measurement of level of a liquid and fill in necessary quantity of a demanded liquid.

Type of a liquid for an automatic transmission: SK ATF SP–III or DIAMOND ATF SP–III
Capacity: 5,9 l


The prevention

Do not pour a liquid above label HOT.


5. Check up liquid level in an automatic transmission.