KIA RIO

Since 2000 of release

Repair and car operation

Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
- 9. Axes and power shafts
   9.1. Specifications
   9.2. Check of a condition of a protective cover
   9.3. Reliability check шлицевого connections
   9.4. Power shaft replacement
   9.5. Power shaft repair
   - 9.6. A forward axis
      9.6.1. Check люфта bearings of forward wheels
      9.6.2. A rotary fist and a nave of a forward wheel
      9.6.3. The bearing of a nave of a forward wheel
      9.6.4. Adjustment of a tightness of bearings of a nave of a forward wheel
   9.7. A back axis
   9.8. Adjustment of a tightness of bearings of a back wheel
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment

http://www.zolftgenwell.org/

9.6. A forward axis

THE GENERAL DATA

Rotary fist and nave of a forward wheel

1 – a tip of steering draught;
2 – a rotary fist;
3 – brake шит;
4 – распорная the plug;
5 – the external bearing;
6 – an external oil sealing ring; 7 – a nave;
8 – a nut;
9 – the spherical hinge of the bottom lever;
10 – the internal bearing;
11 – an internal oil sealing ring.

The forward wheels of the car fixed on a forward suspension bracket, are intended for transfer of a twisting moment of the engine, driving and its braking. For twisting moment transfer forward wheels incorporate to a transmission power shafts.

The rotary fist is an element on which the wheel nave fastens, and also is used as a suspension bracket and steering element. For turn of a rotary fist the hinge of a tip of steering draught is connected to it. As the suspension bracket element a rotary fist is connected to rack MacPherson and the bottom lever of a forward suspension bracket.

Elements of brake system are the supports fixed on a rotary fist and brake disks, fixed on naves.

The nave of a forward wheel is established in a rotary fist on two conic bearings.
Power shaft fastening to a nave is carried out by a nut with a fillet. For an exception отворачивания nuts the nut fillet is bent in power shaft dredging. After отворачивания nuts them it is necessary to replace each time with the new.