Since 2000 of release

Repair and car operation

Kia Rio
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, А5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. A transmission
- 9. Axes and power shafts
   9.1. Specifications
   9.2. Check of a condition of a protective cover
   9.3. Reliability check шлицевого connections
   9.4. Power shaft replacement
   9.5. Power shaft repair
   - 9.6. A forward axis
      9.6.1. Check люфта bearings of forward wheels
      9.6.2. A rotary fist and a nave of a forward wheel
      9.6.3. The bearing of a nave of a forward wheel
      9.6.4. Adjustment of a tightness of bearings of a nave of a forward wheel
   9.7. A back axis
   9.8. Adjustment of a tightness of bearings of a back wheel
+ 10. A suspension bracket
+ 11. Wheels and tyres
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. Air central air
+ 16. The electric equipment

Дробильно-сортировочное оборудование по материалам сайта.
Газовые баллоны для легковых автомобилей еще здесь.
стоимость станцию перекачки конденсата, ссвк.
Смотрите как правильно оценить компанию- Картина Дня.
кнопки вызова официантов, клубы.

9.6.1. Check люфта bearings of forward wheels

1. Lift the car and fix on support. Moving a wheel in various directions define presence люфта bearings of a forward wheel.

Люфт bearings of a forward wheel: 0 mm

2. Manually, as soon as possible rotate a wheel and be convinced that the wheel rotates in regular intervals and without extraneous noise.

The prevention

Do not mix люфт bearings with люфтом the spherical hinge of the bottom lever of a forward suspension bracket. At presence люфта bearings it is necessary to adjust a preliminary tightness of bearings.

3. Remove a wheel. Turn out bolts, remove a support of a forward brake and, without disconnecting from it a brake hose, a soft wire fix it on an amortisation rack.
4. Establish a measuring tip of the indicator of hour type on an end face of a nave of a forward wheel and, moving a nave along an axis, measure люфт the bearing.

Axial люфт: 0 mm